Fountain Hills Electrical Company is the call to make when the power goes wrong, when a project needs new circuits, or when a property needs a full electrical upgrade. We work with homeowners, landlords, property managers, and commercial clients across Fountain Hills and the wider Maricopa County area. The work covers everything from a single dead outlet to a full service upgrade, from new lighting to dedicated circuits for major appliances. Breakers that hold. Outlets that work. Lights that stay on. We are available every day from 5:00 AM to 10:30 PM.
Call (480) 923-2895 for a quote.
Whether it's a single outlet or a full panel upgrade, the first step is always the same: figure out exactly what is happening before anything else. Electrical problems rarely announce themselves clearly, and the symptom you notice is not always where the fault lives.
Common calls we handle include:
A diagnostic visit means tracing the problem to its source, scoping what the fix involves, and explaining what was found before any work begins. That includes checking whether GFCI and AFCI protection is doing its job, since both are part of what keeps a circuit safe from ground faults and arc faults. We keep you informed from diagnosis to final test, so nothing is left unexplained. Reach out and we'll get it diagnosed.
Your home deserves wiring that's safe and up to code, and the panel is where that story starts. An undersized or aging panel creates problems across the whole property, not just at the box itself.
Panel replacement and service upgrades come up for several reasons: a 100-amp service that can no longer carry the load, a panel that buzzes or runs warm, breakers that trip under ordinary use, or a remodel that adds circuits the existing service cannot support. Adding an EV charger, connecting a solar and battery system, or bringing in a new high-draw appliance all trigger a load calculation to confirm the service entrance can carry what is being asked of it.
We handle 100-amp to 200-amp upgrades, full panel replacements, and subpanel installations for garages, additions, pool equipment, and detached structures. Electrical work done to the code inspectors here enforce is the standard we hold every job to. One call gets the problem looked at properly.
Homes and businesses need different wiring answers, but the underlying need is the same: outlets and switches that work reliably where you need them.
On the outlet side, that covers adding an outlet to a room that does not have one, replacing worn or damaged receptacles, installing GFCI outlets in kitchens, bathrooms, garages, and outdoor areas, and adding AFCI outlets where the wiring calls for arc-fault protection. USB outlets are a common request for home offices and bedrooms. On the switch side, the work includes dimmer switches, three-way switches for stairwells and hallways, and straightforward light switch replacements.
Landlords and property managers call us regularly for this kind of work. Rental properties accumulate outlet and switch problems over time, and getting them addressed before a tenant move-in keeps the property compliant and the calls down. Pricing is confirmed on the call before anything is scheduled. We show up ready to wire. Call and we'll get you back to full power.
The homes and wiring in this area have their own quirks, and lighting is one place where that shows up clearly. Desert construction, covered patios, and poolside spaces all create situations where standard lighting approaches need adjustment.
Indoors, we install recessed lighting and can lights, under-cabinet lighting for kitchens and workspaces, and ceiling fans with integrated light kits. Outdoors, the work covers exterior fixture installation, landscape lighting, security lighting, and motion sensor lights. Fountain Hills evenings are warm enough to use most of the year, and well-placed outdoor lighting makes a real difference for patios, driveways, and pool areas. Code-compliant wiring applies to every fixture type, inside and out. We'll get your lights back on fast.
Older wiring is one of the most common issues in homes that have not been updated in decades. Knob-and-tube wiring and aluminum branch circuit wiring both present problems that a rewire or targeted replacement addresses properly. A full home rewire replaces the branch circuit wiring throughout the property and brings everything up to current standards.
Dedicated circuits are a separate but related category. A dryer, refrigerator, hot tub, or pool pump each needs its own circuit sized for the load it draws. Pool and spa wiring involves grounding and bonding requirements that go beyond a standard circuit installation, and we handle those as part of the job.
Remodel and addition work is also a regular part of what we do: kitchen and bathroom remodels, garage wiring, shed and detached garage circuits, and pool house wiring. Grounding and bonding are part of every dedicated circuit installation, not an afterthought. Code-compliant wiring on every job is the standard, whether the project is a single new circuit or a whole-house rewire.
Maricopa County's climate shapes what electrical work comes up most often here. Extreme summer heat runs air conditioning loads hard for months at a time, solar adoption across the Phoenix metro area is among the highest in the country, and EV ownership continues to grow in communities like Fountain Hills. With a local company, a question about the work gets a straight answer.
Panels in this area carry a heavier continuous load than in most of the country. Air conditioning runs for long stretches, and when a solar and battery system or an EV charger is added to the mix, the service entrance has to be assessed to confirm it can carry the combined draw. An upgrade starts with a service entrance assessment and a load calculation, moves to selecting the right panel size, and ends with new panel installation and code-compliant wiring throughout. Getting the capacity right at the panel protects everything downstream.
The electrical side of a solar or battery-backup project is what we handle. That means wiring the system back to the panel, installing the dedicated circuits and disconnects the installation requires, and confirming the panel has the capacity to carry the added load without overloading the service. Maricopa County is one of the strongest residential solar markets in the country, and the electrical work that connects a system safely to the home's existing service is what makes the whole thing function correctly.
A Level 2 home EV charger runs on a dedicated 240-volt circuit. The job involves running that circuit from the panel to the charger location, confirming the panel has capacity for the added load, and installing either a hardwired connection or a 240-volt outlet depending on the charger type. EV ownership in the Phoenix metro area has grown steadily, and Fountain Hills properties are no exception. Before scheduling, it is worth confirming panel capacity on the call so the job is scoped correctly from the start.
Call (480) 923-2895 to go over what your panel can support.
Arizona's monsoon season brings voltage spikes that can reach electronics and appliances through the power lines. Whole-home surge protection installs at the panel and catches those spikes before they travel through the circuits. It covers everything connected to the home's wiring, not just what is plugged into a surge strip.
An electrical safety inspection covers the panel condition, branch circuit wiring, grounding, and GFCI and AFCI coverage throughout the property. It is a useful step when buying a home, when a rental property needs a compliance review, or when an older home has not been looked at in years.
We also handle hard-wired smoke detector installation and hard-wired carbon monoxide detector installation for properties that need them. Backup generator hookup and transfer switch installation round out this category. The electrical side of a generator connection involves the transfer switch, the wiring from the switch to the panel, and confirming the panel is set up to handle the load safely during an outage.
The sooner you call, the sooner the power is back on, and the sooner you have a real number to work with. Electrical pricing is one of the most searched topics online, and the honest answer is that the rate depends on the job.
What we can tell you is how the conversation goes. When you call, the scope gets discussed, the rate gets confirmed, and nothing is scheduled until you know what the work involves and what it costs. That applies whether the question is about panel replacement, EV charger installation, rewiring an older home, or adding a ceiling fan.
Know the price. Know the scope. Know what happens next.
We work across Fountain Hills and throughout Maricopa County, covering residential and commercial properties of all types. That includes single-family homes, rental units, apartment buildings, offices, and retail spaces.
Nearby communities we serve regularly include Scottsdale, Mesa, Tempe, Gilbert, Chandler, Queen Creek, Apache Junction, and Rio Verde. If your property is in the area and you need electrical work handled properly, we are the call to make.
Common signs include breakers that trip under normal loads, a panel that buzzes or runs warm to the touch, breakers that will not reset or trip again immediately after being reset, and a service size that cannot support what the property currently needs. Older panels in Fountain Hills may also carry outdated breaker types that do not meet current code.
If you are seeing any of these, call (480) 923-2895 and we will talk through what the panel assessment involves.
A Level 2 home charger requires a dedicated 240-volt circuit run from the panel to wherever the charger will be mounted. The job involves confirming the panel has capacity for the added load, sizing the breaker correctly, running the circuit, and installing either a hardwired connection or a 240-volt outlet depending on the charger model. We assess the panel first, on the call and on site, so the scope is accurate before anything is scheduled.
The process starts on the call. We ask about the symptoms, the age of the property, and what has or has not been updated. When we arrive, we test the circuit, inspect the panel connection, and check the wiring condition before confirming the scope. Nothing is scheduled or started until you know what the work involves and what it costs.
Someone needs to be present to provide access to the panel, the work areas, and any locked spaces the job requires. If access can be arranged another way, discuss that on the call when the visit is being scheduled. For most jobs in a home or rental property, having the owner or a responsible adult on site makes the visit go more smoothly.
It depends on the job. Panel work, service upgrades, and circuit installation typically require the power to be shut off to the affected circuits or to the whole panel for part of the visit. We confirm what the outage will cover and how long it is expected to last before the work begins, so you can plan around it.
Discolored or warm outlets, a burning smell near switches or the panel, flickering lights that are not caused by a loose bulb, and frequently tripping breakers are all worth investigating. Homes in Fountain Hills with wiring that has not been updated in decades may also carry knob-and-tube or aluminum branch circuit wiring, which presents its own set of concerns. An inspection makes those issues visible before they become a fault.
An inspection is worth scheduling before buying or selling a home, when a rental property needs a compliance review, after a significant storm, or when an older Fountain Hills property has not had its wiring looked at in years. It covers the panel condition, branch circuit wiring, grounding, and GFCI and AFCI coverage, and it tells you what is current, what is marginal, and what needs attention.
Yes. Urgent electrical faults, including sparking outlets, a burning smell, a breaker that will not reset, or a section of the property that has lost power, are treated as priority calls. We are available every day from 5:00 AM to 10:30 PM, and short-notice calls are handled when the schedule allows.
Call (480) 923-2895 and describe what is happening.
Wiring that runs through finished walls, attics, or crawl spaces takes longer to access and trace than wiring in open framing. Older wiring that was not installed to current standards may also require additional work to bring the affected circuit up to code before the repair or installation can be completed correctly. We identify these factors during the diagnostic visit and explain what they mean for the scope and price before proceeding.
It depends on what the diagnostic finds. A single damaged outlet or a loose connection at a switch is a straightforward repair. When the fault traces back to the wiring behind the device, a section of circuit, or a panel connection, patching the visible symptom does not address the underlying problem. We explain what was found and what the right fix involves so you can make an informed decision.
Outdoor wiring requires weatherproof boxes, conduit or direct-burial cable rated for exterior use, and GFCI protection at the outlet. Fountain Hills properties with patios, pool areas, and landscape lighting have real outdoor electrical demands, and the wiring for those spaces has to meet the code requirements for exterior circuits. We confirm the right approach for the specific location when we scope the job.
Clear a path to the breaker panel and move furniture or stored items away from any outlets, switches, or fixtures that need work. If the panel is in a closet, garage, or utility room, make sure it is accessible without moving heavy items on site. We will flag anything else that needs to be cleared when we confirm the visit on the call.
A breaker trips when a circuit draws more current than it is rated for. A single trip caused by running too many appliances at once is a normal protection response. A breaker that trips repeatedly under ordinary use, will not reset, or trips immediately after being reset points to a wiring fault, an undersized circuit, or a panel problem that needs to be diagnosed rather than reset and ignored.
Fountain Hills Electrical Company is available every day from 5:00 AM to 10:30 PM. Straight answers on the phone. Real electrical work. Quick to respond.
Call (480) 923-2895 to request a quote or schedule a service call.
The scope and the price are settled on the call before anything is scheduled.
Whether the call is about a dead outlet, a panel that keeps tripping, or a full service upgrade, we handle the electrical work that keeps homes and businesses running in Fountain Hills. The table below covers what each service includes, who it fits best, and one practical thing worth knowing before you call. Pricing is confirmed on the call before anything is scheduled.
| Service Type | What's Included | Best For | What to Keep in Mind |
|---|---|---|---|
| Outlet & Switch Installation |
| Homeowners, landlords, and property managers adding or replacing devices | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. We confirm coverage during the visit. |
| Electrical Repairs & Troubleshooting |
| Any property with a symptom that needs a source | The visible symptom is not always where the fault lives. Tracing it to the source before replacing parts saves time and avoids repeat calls. |
| EV Charger Installation |
| Homeowners adding a Level 2 home charging station | EV charger installation starts with confirming panel capacity on the call so the job is scoped correctly before anything is scheduled. |
| Electrical Safety Inspections |
| Home buyers, sellers, and landlords with older properties | An inspection is a useful step before a real estate transaction, when a rental property needs a compliance review, or when an older home has not had its wiring looked at in years. |
| Dedicated Appliance Circuits |
| Any high-draw appliance that needs its own circuit | Pool and spa wiring involves grounding and bonding requirements that go beyond a standard circuit installation. These are handled as part of the job, not as an add-on. |
| Lighting Installation |
| Interior upgrades and outdoor spaces used year-round | Fountain Hills evenings are warm enough to use most of the year, and outdoor lighting for patios, driveways, and pool areas requires weatherproof boxes and exterior-rated wiring. |
| Whole-Home Surge Protection |
| Homes with sensitive electronics or frequent voltage fluctuations | Arizona's monsoon season brings voltage spikes that travel through the power lines. A panel-mounted device catches them before they reach the circuits, covering everything in the home rather than just what is on a strip. |
| Breaker & Fuse Repair |
| Properties with a breaker tripping under ordinary use | A breaker that trips repeatedly under normal load points to a wiring fault or an undersized circuit, not just a reset that needs doing. |
| Electrical Panel & Service Upgrades |
| Homes adding EV chargers, solar systems, or high-draw appliances | Maricopa County's long cooling season puts continuous load on panels. A load calculation confirms the service entrance can carry what is being asked of it before the upgrade is scoped. |
| Ceiling Fan Installation |
| Rooms without adequate airflow or existing overhead lighting | Ceiling fans require a rated electrical box that can support the weight and motion. Standard light fixture boxes are not always adequate and may need to be replaced. |
| Solar & Battery Installation |
| Homeowners installing or expanding a solar or battery-backup system | Maricopa County is one of the strongest residential solar markets in the country. The electrical work that connects a system safely to the home's existing service is what makes the whole installation function correctly. |
| Wiring & Circuit Installation |
| Older homes or properties undergoing renovation | Aluminum branch circuit wiring and knob-and-tube wiring both present concerns that targeted replacement or a full rewire addresses properly. An inspection identifies what is present before the scope is set. |
What causes a breaker to trip repeatedly, and when should I call?
A single trip caused by running too many appliances at once is a normal protection response. A breaker that trips repeatedly under ordinary use, or one that trips again immediately after being reset, points to a wiring fault, an undersized circuit, or a panel problem. Resetting it and moving on does not fix what is causing the trip. Call us and we will trace it to the source.
How do I know if my home is ready for the added electrical load of a new appliance or system?
The answer starts with a load calculation. We look at what the service entrance is rated for, what is already drawing from it, and what the new load will add. Air conditioning in Fountain Hills runs hard for months at a time, and that continuous draw is already factored into how the panel is being used. Adding an EV charger, a solar system, or a large appliance on top of that may require a service upgrade before the new circuit can be safely installed.
What is the risk of leaving aluminum branch circuit wiring in place?
Aluminum wiring expands and contracts more than copper, which can loosen connections at outlets, switches, and the panel over time. Loose connections generate heat, and heat at a connection point is a fire risk. Homes in Fountain Hills built during certain decades may have aluminum branch circuit wiring. An inspection identifies whether it is present and what the right approach is, whether that means targeted remediation at the devices or a broader rewire.
Faults Traced Before Anything Is Replaced
We identify the source of the problem before any parts are changed out. A repair that addresses the symptom without finding the cause tends to come back.
Do jobs like panel upgrades and new circuits require permits and inspections?
Most significant electrical work, including panel replacements, service upgrades, new circuit installations, and EV charger hookups, requires a permit and a code inspection in Maricopa County. We handle the permit side where it applies and make sure the work is done to the standards the local inspectors enforce. You do not need to manage that process yourself.
What does GFCI protection do, and where is it required?
A GFCI outlet monitors the current flowing through a circuit and trips in milliseconds if it detects a ground fault, which is the kind of fault that can cause a shock. Code requires GFCI protection in kitchens, bathrooms, garages, outdoor areas, and anywhere near water. If you have older outlets in those locations that are not GFCI-protected, we can assess coverage and install what is needed.
How long does a panel upgrade or full rewire typically take?
A panel replacement usually takes the better part of a day, depending on the service size and the condition of the existing wiring. A full home rewire takes longer and depends on the size of the property, how accessible the wiring runs are, and whether the walls are open or finished. We scope the timeline on the call and confirm it when we assess the property, so you know what to plan around before the work begins.
Code-Compliant Work on Every Job
Every circuit, panel, and fixture installation is held to the standards the local inspectors here enforce. That applies to straightforward repairs and to full service upgrades alike.
When should I call an electrician instead of handling it myself?
Swapping a light bulb or resetting a tripped breaker is straightforward. Anything that involves opening an outlet, replacing a switch, running a new circuit, or touching the panel is a different category. Work inside the panel or on a live circuit carries real risk, and work done outside of code can create problems when a property is sold or inspected. If the task involves wiring, call us and we will tell you what the job involves.
What does whole-home surge protection actually cover?
A panel-mounted surge protector intercepts voltage spikes before they travel through the home's circuits. That covers everything connected to the wiring: appliances, HVAC equipment, entertainment systems, computers, and any other device drawing from the panel. Arizona's monsoon season is a real source of voltage spikes, and a panel-level device provides coverage that a power strip cannot match.
Scope Agreed Before the Panel Is Opened
The price and the scope are confirmed before any work begins. You know what the job involves and what it costs before anything is scheduled.
What is involved in wiring a pool or spa circuit?
Pool and spa wiring goes beyond running a standard circuit to the equipment. It involves grounding and bonding requirements that are specific to water environments, including bonding the water, the pool shell, the pump, and any metal components within a certain distance of the water. These requirements exist because water and electricity interact differently than a dry interior circuit. We handle the grounding and bonding as part of the job, not as a separate add-on.
What does a backup generator hookup involve on the electrical side?
Connecting a backup generator to a home requires a transfer switch, which prevents the generator from back-feeding power into the utility lines while the grid is down. The job involves installing the transfer switch, wiring it to the panel, and confirming the panel is set up to handle the load the generator will carry during an outage. The generator itself is separate equipment. What we handle is the electrical connection that makes it work safely with the home's wiring.
What does a warm or buzzing outlet indicate?
A warm outlet or one that buzzes when something is plugged in points to a loose connection, an overloaded circuit, or a wiring problem behind the device. Either condition can generate heat at the connection point. Heat at a connection is worth taking seriously rather than watching to see if it gets worse. Call us and we will diagnose what is happening before it becomes a bigger problem.
Call (480) 923-2895 and we will go over what the job involves, confirm the rate, and get it on the schedule.
(480) 923-2895